Click this text to start editing. This block is a basic combination of a title and a paragraph. Use it to welcome visitors to your website, or explain a product or service without using an image. Try keeping the paragraph short and breaking off the text-only areas of your page to keep your website interesting to visitors.

There's Nothing Else Like It

Perfect for any wet or dry deck areas from swimming pools, wading pools and splash parks to pathways, driveways, porches & steps, and more.

Skid-resistant when wet, much like your bath mat, which makes rubber surfacing perfect for wet deck applications. The surface is comfortable to walk on in bare feet, even on the hottest summer day.

Professionally installed over your new or existing surface.

When finished, it expands and contracts to accommodate temperature changes and ground movement. It bonds directly to any solid substrate material including concrete, asphalt, epoxy stone, brick, wood, steel, tarmac, chipboard, and aluminum.

The versatile nature of our product makes it perfect for creating design elements that will complement your area.

► Porches, Steps and Walkways

► Pool Decks and Splash Pads

► Play and Sports areas

► Garages

► Golf Courses

► Animal Facilities

Our Blog

An ongoing series of informational entries


February 14, 2018

Once the final layer is finished the surface can accept light foot traffic in 24 hours and achieves full cure in 72 hours.

Final Layer

February 14, 2018

Once leveling is completed we start applying the top layer.

No need to remove your old surface!

January 15, 2018

Depending on the condition of the surface we apply a sub layer of black rubber which is 100 percent recycled tires to level and feather out dips, cracks and trip hazards.


February 14, 2018

Depending on the surface light prep may be required such as cutting around drains and pool copings to allow our surface to be tucked in at edges for a smooth transition. The rubber we use starts out as small crumbs ranging in sizes from 1.5mm to 3mm. It's available in about 12 colors. Depending on the color combo chosen, we then mix the rubber with our special formulated binder in large mixers. We then hand apply and trowel  the rubber to the surface to the desired thickness after applying our primer which consists of our binder.